Our light grey concrete is mixed with a small amount of white pigment, creating a clearer contrast between our dark and light tabletops. It has a raw, industrial concrete expression inspired by the construction industry.
Concrete is a material made from elements such as calcium, gravel and water. It will develop a natural patina over time, and small marks or stains should be seen as part of the character of the material.
When you first receive your table, we recommend treating it regularly in the beginning to saturate the concrete surface. The more the surface is treated at first, the better protected it becomes, and the fewer stains you are likely to experience.
Wipe the surface with a clean, damp cloth.
Use original soap flakes as part of your ongoing cleaning routine.
* Never use acidic or harsh cleaning products, such as Ajax or similar, as they may discolour the surface.
Choosing the right treatment - wax and oil will make the tabletop appear darker and slightly more silky and smooth. Soap flakes will make the surface appear lighter and more dusty and matte.
In this video, we’re applying soap flakes - to see wax, watch guide for "Dark Concrete".
- Soap flakes
- A clean, soft cloth - preferably two: one for applying and one for polishing
- Water
- Mix one handful of soap flakes with approx. 1 litre of water, or follow the mixing ratio on your chosen soap flakes.
- Whisk the mixture until it creates a light foam.
- Apply the foam to the tabletop in gentle circular motions, creating a thin, even layer, and let the soap sit for a couple of minutes and remove the excess soap.
- Repeat the process if needed - several thin layers are better than one thick layer.
* For light concrete, we recommend soap flakes. Soap will make the surface appear lighter and more dusty/matte.
* Even when treated correctly, concrete is not 100% resistant to acid, coffee, red wine, grease or similar substances.
* Avoid placing hot or moist objects directly on the tabletop.
